Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AP362T120612 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a all ends
The maximum temperature at which the item is rated to operate for an extended period of time.
275.0 deg fahrenheit single response
The national stock number or the identification information of the end equipment for which the item is a part.
f/A-18E, f
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
inverted flare (tube) all ends
A measurement of the longest dimension of the leg,in distinction from width.
1.062in. 3rd end
A measurement of the longest dimension of the leg,in distinction from width.
0.945in. 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
1.953in. 1st end bulkhead
Indicates the type of connection/s/.
threaded external tube all ends
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16 1st end bulkhead
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16 3rd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
20 2nd end
The maximum pressure at which the item is rated for operation.
5.000 pounds per square inch single response
A designation that is used for the purpose of general identification of the thread.
0.562in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.000in. 1st end bulkhead ⁓1/64"
A designation that is used for the purpose of general identification of the thread.
1.000in. 3rd end ⁓3-1/64"
The angle of the end surface upon which the mated surface seats.
8.5 degrees all ends
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
agav and cqgm and aehz
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.375in. 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. 1st end bulkhead
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. 3rd end
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4965, 6AL-4V assn std single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj 1st end bulkhead
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj 3rd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjs 2nd end
Answers.
Unjs 2nd end
Unj 3rd end
Unj 1st end bulkhead
Titanium alloy
20 2nd end
16 3rd end
16 1st end bulkhead
3a all ends
Schedule B number: 8108908000
nmfc 052190
Other wrought titanium
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-509-9778 TEE,TUBE
Used on f/a-18e,f. unjs 2nd end thread series 20 2nd end thread quantity per inch 3a all ends thread class
- NIIN
- 015099778
- NIIN Date
- 07/10/03
- Schedule B
- 8108908000
- Name Code
- 03809
- FIIG
- A080B0
- QUP
- Historical Price
- $220.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AFP1707T120612 | Cage 30974 |
| 2. | 7M1205T120612 | Cage 76301 |
| 3. | R45122T5120612 | Cage 50599 |
Major End Users Countries and entities
- - Department of The Navy
- - Australia
Availability for AP362T120612 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 052190 PIPE,TUBING,OR PIPE OR TUBING FITTI
- UFC (universal freight code)
- 30000
Similar by Design Other tees with similar characteristics
Nothing similar to this part number was found in our inventory
AP362T120612 / Tee,tubeWhat is the formal definition of this item?
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. it may have side inlet(s). it is used as a junction at the intersection of a tube or tube fitting.
