Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7M118D12-04-12 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a 1st end bulkhead
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a all ends
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared (tube) all ends
A measurement of the longest dimension of the leg,in distinction from width.
1.679in. 3rd end
A measurement of the longest dimension of the leg,in distinction from width.
2.133in. 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
2.679in. 1st end
Indicates the type of connection/s/.
threaded external tube 1st end bulkhead
Indicates the type of connection/s/.
threaded external tube all ends
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 1st end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 1st end bulkhead
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 3rd end
A designation that is used for the purpose of general identification of the thread.
0.438in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.062in. 1st end ⁓1/64"
A designation that is used for the purpose of general identification of the thread.
1.062in. 1st end bulkhead ⁓1/64"
A designation that is used for the purpose of general identification of the thread.
1.062in. 3rd end ⁓3-1/64"
The angle of the end surface upon which the mated surface seats.
37.0 degrees all ends
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.250in. 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. 1st end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. 3rd end
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy
The type of media for which the item is designed.
fluid single response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, ty 2 mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 3rd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 1st end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 1st end bulkhead
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf 2nd end
Answers.
Unf 2nd end
Un 1st end bulkhead
Un 1st end
Un 3rd end
Aluminum alloy
12 3rd end
12 1st end bulkhead
12 1st end
3a all ends
3a 1st end bulkhead
Schedule B number: 7609000000
Aluminum tube or pipe fittings (couplings,elbows sleeves)
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-00-158-9062 TEE,TUBE
unf 2nd end thread series anodize surface treated 12 3rd end thread quantity per inch 3a all ends thread class
- NIIN
- 001589062
- NIIN Date
- 01/24/73
- Schedule B
- 7609000000
- Name Code
- 03809
- FIIG
- A080B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 7M118 | Cage 76301 |
Major End Users Countries and entities
- - Israel
- - Germany
Availability for 7M118D12-04-12 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other tees with similar characteristics
Nothing similar to this part number was found in our inventory
7M118D12-04-12 / Tee,tubeWhat is the formal definition of this item?
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. it may have side inlet(s). it is used as a junction at the intersection of a tube or tube fitting.
