Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. CK144K20-16 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a 2nd end
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a 1st end
Refers to the location of the ends whether on the same centerline (concentric) or on different centerlines (eccentric).
concentric
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared (tube) 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared (tube) 2nd end
Indicates the type of connection/s/.
threaded external tube 1st end
Indicates the type of connection/s/.
threaded external tube 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 1st end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 2nd end
A designation that is used for the purpose of general identification of the thread.
1.312in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
1.625in. 1st end ⁓1/64"
The angle of the end surface upon which the mated surface seats.
37.0 degrees 1st end
The angle of the end surface upon which the mated surface seats.
37.0 degrees 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
1.000in. 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
1.250in. 1st end
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.010in.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
machined groove in flared ends to accommodate seal rings per KC103
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 316
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-S-763, cl 316 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate outside
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 1st end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 2nd end
Answers.
Un 2nd end
Un 1st end
Steel comp 316
12 2nd end
12 1st end
3a 1st end
3a 2nd end
Schedule B number: 7307994000
Other fittings nesoi of alloy steel not stainless
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-083-5857 REDUCER,TUBE
un 2nd end thread series passivate outside surface treated machined groove in flared ends to accommodate seal rings per KC103 12 2nd end thread quantity per inch 3a 1st end thread class
- NIIN
- 010835857
- NIIN Date
- 09/26/79
- Schedule B
- 7307994000
- Name Code
- 08506
- FIIG
- A080B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | KC144C20-16 | Cage 22264 |
| 2. | AS4328K2016 | Cage 81343 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
Availability for CK144K20-16 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other reducers with similar characteristics
Nothing similar to this part number was found in our inventory
CK144K20-16 / Reducer,tubeWhat is the formal definition of this item?
A straight tube fitting having a different size connection on each end. it is designed to join two tubes of different sizes. excludes bushing (as modified).
