AS1007W0506 Tube Reducer

Datasheet. AS1007W0506 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a 2nd end

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a 1st end bulkhead

Reducer Type
Refers to the location of the ends whether on the same centerline (concentric) or on different centerlines (eccentric).

concentric

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

hh/UH1 helicopter

Connection Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.

flareless (tube) 1st end bulkhead

Connection Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.

flareless (tube) 2nd end

Connection Type
Indicates the type of connection/s/.

threaded external tube 1st end bulkhead

Connection Type
Indicates the type of connection/s/.

threaded external tube 2nd end

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

18 2nd end

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20 1st end bulkhead

Maximum Operating Pressure
The maximum pressure at which the item is rated for operation.

1500.0 pounds per square inch single response

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.500in. 1st end bulkhead ⁓1/64"

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.563in. 2nd end ⁓2-1/64"

Seat Angle
The angle of the end surface upon which the mated surface seats.

24.0 degrees 1st end bulkhead

Seat Angle
The angle of the end surface upon which the mated surface seats.

24.0 degrees 2nd end

Nominal Outside Diameter Tube Accommodated
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.

0.312in. 1st end bulkhead

Nominal Outside Diameter Tube Accommodated
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.

0.375in. 2nd end

Nominal Overall Length
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.750in.

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

fitting, union, standard and reducer, bulkhead, flareless

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

wrenching facility distance across flats .802 to .815

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 4124 type 7075-T7351 assn std single material response or AMS-QQ-A-225/9 type 7075-T73 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

ams 2472 assn std single treatment response or MIL-S-8625, type ii, class 2; dye brown mil spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf 2nd end

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf 1st end bulkhead

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unjf 1st end bulkhead

What class is the thread series?

Unjf 2nd end

What material is the tube reducer made of ?

Aluminum alloy

What is the thread quantity per inch?

20 1st end bulkhead

What is the thread quantity per inch?

18 2nd end

What is the thread class?

3a 1st end bulkhead

What is the thread class?

3a 2nd end

What is the NSN for AS1007W0506?

4730-01-559-1757

What's the federal classification of AS1007W0506?

FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings

Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).

AS1007W0506

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. AS1007W0506 specification

Answers.

NSN 4730-01-559-1757 REDUCER,TUBE

Major End Users Countries and entities

Availability for AS1007W0506 A member of our team will provide you with a price and availability quote

Shipping Information

Similar by Design Other reducers with similar characteristics

AS1007W0506 / Reducer,tubeWhat is the formal definition of this item?