Serving our customers with quality and safety first.
3a 2nd end
3a 1st end
135.0 deg fahrenheit 2nd response
54.0 deg fahrenheit 1st response
used on phantom F-4 aircraft
flared (tube) 1st end
flared (tube) 2nd end
1.039in. 2nd end
2.306in. 1st end
threaded external tube 1st end
threaded external tube 2nd end
12 1st end
12 2nd end
1500.0 pounds per square inch single response
1.625in. 1st end ⁓1/64"
1.625in. 2nd end ⁓2-1/64"
12.0 degrees 1st end
12.0 degrees 2nd end
45.0 degrees
1.250in. 1st end
1.250in. 2nd end
1st end bulkhead thread size 1.625 in. nom, qty per in. 12, class 3a, unj
steel
fed std 66, aisi 1137 fed std single material response or sae 1137 assn std single material response or sae 1141 assn std single material response
aeronautical fluid single response
cadmium inside
QQ-P-416, ty 2, cl 2 fed spec single treatment response inside
unj 1st end
unj 2nd end
1EA
Unj 2nd end
Unj 1st end
Steel
12 2nd end
12 1st end
3a 1st end
3a 2nd end
Schedule B number: 7307929000
nmfc 052190
Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
Used on phantom f-4 aircraft. unj 2nd end thread series cadmium inside surface treated 1st end bulkhead thread size 1.625 in. nom, qty per in. 12, class 3a, unj 12 2nd end thread quantity per inch 3a 1st end thread class
1. | 2-01587F2020 | Cage 00624 |
2. | STSPB109F2020 | Cage 98897 |
3. | ER112-2020 | Cage 79470 |
4. | ER112-2020 | Cage 01276 |
5. | DLG109F2020 | Cage 14798 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.