Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AP12332-T16H specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
socket (tube) 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
swivel nut, gasket seal (tube) 1st end
A measurement of the longest dimension of the leg,in distinction from width.
1.520in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
2.460in. 2nd end
Indicates the type of connection/s/.
threaded internal tube 1st end
Indicates the type of connection/s/.
unthreaded internal tube 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
14 1st end
A designation that is used for the purpose of general identification of the thread.
1.250in. 1st end ⁓1/64"
The angle that the flow is turned from the straight flow.
90.0 degrees
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
1.000in. 1st end
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
2lockwire holes in nut
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp XM-10 body
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5656 assn std single material response body
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjs 1st end
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.
asmodified by special features
Answers.
Unjs 1st end
Steel comp 630 nut
Steel comp xm-10 body
14 1st end
3b 1st end
Schedule B number: 7307929000
Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-380-9260 ELBOW,TUBE
unjs 1st end thread series passivate surface treated 2lockwire holes in nut 14 1st end thread quantity per inch 3b 1st end thread class
- NIIN
- 013809260
- NIIN Date
- 09/30/93
- Schedule B
- 7307929000
- Name Code
- 03771
- FIIG
- A080B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | D11021AT-16W | Cage 14798 |
| 2. | 4730-057T16L | Cage S7549 |
Major End Users Countries and entities
- - Taiwan, Province of China
Availability for AP12332-T16H A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
AP12332-T16H / Elbow,tubeWhat is the formal definition of this item?
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.
