Serving our customers with quality and safety first.
3a 1st end bulkhead
3a all ends
275.0 deg fahrenheit single response
support equipment, B-2 bomber.
flareless (tube) all ends
1.250in. 1st end bulkhead
2.250in. 1st end
threaded external tube 1st end bulkhead
threaded external tube all ends
12 1st end bulkhead
12 all ends
3000.0 pounds per square inch single response
1.062in. 1st end bulkhead ⁓1/64"
1.062in. all ends ⁓1-1/16"
12.0 degrees all ends
45.0 degrees
0.750in. 1st end bulkhead
0.750in. all ends
this standard provides an identifying number for an, as and ms bulkhead fittings with chemical conversion coating at bulkhead interface for electrical bonding
aluminum alloy 2014
QQ-A-367 fed spec single material response
aeronautical fluid single response
anodize
MIL-A-8625, type 2.class 1 mil spec single treatment response
unj 1st end bulkhead
unj all ends
76823-07A314 government specification
1EA
Unj all ends
Unj 1st end bulkhead
Aluminum alloy 2014
12 all ends
12 1st end bulkhead
3a all ends
3a 1st end bulkhead
Schedule B number: 7609000000
nmfc 052190
Aluminum tube or pipe fittings (couplings,elbows sleeves)
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
Used on support equipment, b-2 bomber.. unj all ends thread series anodize surface treated this standard provides an identifying number for an, as 12 all ends thread quantity per inch 3a all ends thread class
1. | 32395ECD12 | Cage 14397 |
2. | 07A314ECD12 | Cage 1W025 |
3. | NA12D12 | Cage 52930 |
4. | 07A314ECD12 | Cage 76823 |
5. | 07A314 | Cage 76823 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.