Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7M148V12 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a 2nd end
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
flared (tube) 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
swivel nut, flare (tube) style 3 optional end 1st end
A measurement of the longest dimension of the leg,in distinction from width.
1.125in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
1.641in. 2nd end
Indicates the type of connection/s/.
threaded external tube 2nd end
Indicates the type of connection/s/.
threaded internal tube 1st end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
12 all ends
The maximum pressure at which the item is rated for operation.
3000.0 pounds per square inch single response
A designation that is used for the purpose of general identification of the thread.
1.062in. all ends ⁓1-1/16"
The angle of the end surface upon which the mated surface seats.
37.0 degrees all ends
The angle that the flow is turned from the straight flow.
90.0 degrees
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.750in. all ends
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
37 deg sealing surface shall be free of anodize and alodined per MIL-C-5541, class 1a
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 nut
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2014 elbow
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-225/6 T6 fed spec single material response nut or QQ-A-225/6 T851 fed spec single material response nut
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-367, T6 fed spec single material response elbow
The type of media for which the item is designed.
hydraulic fluid single response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
aluminum and chromate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-83488, class 3, type 2 mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj all ends
Answers.
1EA
Unj all ends
Aluminum alloy 2014 elbow
Aluminum alloy 2024 nut
12 all ends
3b 1st end
3a 2nd end
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-146-7925 ELBOW,TUBE
unj all ends thread series aluminum surface treated 37 deg sealing surface shall be free of anodize 12 all ends thread quantity per inch 3b 1st end thread class
- NIIN
- 011467925
- NIIN Date
- 02/05/83
- Schedule B
- Name Code
- 03771
- FIIG
- A080B0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $286.08 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 10108766 | Cage A486G |
| 2. | 7M148 | Cage 76301 |
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - Finland
- - Spain
- - Israel
- - Singapore
- - Malaysia
- - Australia
- - Canada
- - Republic of Korea
Availability for 7M148V12 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 051400 PIPE FITTINGS ALUMINUM
- UFC (universal freight code)
- 29700
Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
7M148V12 / Elbow,tubeWhat is the formal definition of this item?
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.
