Serving our customers with quality and safety first.
2a 2nd end
2b 1st end
RG-33 mrap
gasket seal (tube) 2nd end
swivel nut, gasket seal (tube) 1st end
1.150in. 1st end
0.984in. 2nd end
threaded external tube 2nd end
threaded internal tube 1st end
0.562in. all ends ⁓9/16"
0.375in. all ends
steel
chromate
unf all ends
1 preformed packing
81343-J1453 professional/industrial association standard
24 figure
1EA
Unf all ends
Steel
2b 1st end
2a 2nd end
Schedule B number: 7307929000
nmfc 052190
Threaded elbows and bends of iron or steel (other than cast iron or stainless steel) for pipes and tubes
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
Used on rg-33 mrap. unf all ends thread series chromate surface treated 2b 1st end thread class
1. | J1453 | Cage 81343 |
2. | 8KP883 | Cage 45152 |
3. | FF2098T0606S | Cage 01276 |
4. | 6-6 520221CA | Cage 81343 |
5. | 2HG257 | Cage 45152 |
6. | 6-6 520221CA | Cage 0FW39 |
7. | 800759 | Cage 57598 |
8. | 3H1098 | Cage 75755 |
9. | FF2098T0606-214 | Cage 01276 |
10. | 6C6LO-S | Cage 30780 |
11. | 6C6LO-S | Cage 98441 |
12. | 6-6 520221CA | Cage 076M6 |
13. | 2HG257 | Cage 75Q65 |
14. | 8KP883 | Cage 75Q65 |
15. | J1453 | Cage 81343 |
16. | FF2098T0606S | Cage 01276 |
17. | 6-6 520221CA | Cage 81343 |
18. | 6-6 520221CA | Cage 076M6 |
19. | 8KP883 | Cage 75Q65 |
20. | 2HG257 | Cage 75Q65 |
21. | 6-6 520221CA | Cage 0FW39 |
22. | 800759 | Cage 57598 |
23. | FF2098T0606-214 | Cage 01276 |
24. | 6C6LO-S | Cage 30780 |
25. | 6C6LO-S | Cage 98441 |
26. | 8KP883 | Cage 45152 |
27. | 3H1098 | Cage 75755 |
28. | 2HG257 | Cage 45152 |
Nothing similar to this part number was found in our inventory
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. it may have side or heel inlet(s). see also elbow, pipe and connector, multiple, fluid pressure line.