Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. R1200-10 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a 1st end
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
compression (tube) 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
compression (tube) 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
plain (pipe) 3rd end
A measurement of the longest dimension of the leg,in distinction from width.
1.313in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
1.437in. 3rd end
Indicates the type of connection/s/.
threaded external pipe 3rd end
Indicates the type of connection/s/.
threaded external tube 1st end
Indicates the type of connection/s/.
threaded external tube 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 1st end
A designation that is used for the purpose of general identification of the thread.
0.500in. 3rd end ⁓3-1/64"
A designation that is used for the purpose of general identification of the thread.
1.000in. 1st end ⁓1/64"
A designation that is used for the purpose of general identification of the thread.
1.000in. 2nd end ⁓2-1/64"
The nominal radius of the end surface upon which the mated surface seats.
0.062in. 1st end
The nominal radius of the end surface upon which the mated surface seats.
0.062in. 2nd end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.625in. 1st end
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.625in. 2nd end
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
supports clark model 290m; tractor, wheeled, ind., diesel driven; med dbp, nsn 2420000889384, w/rops nsn 2420010590090
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium inside
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium outside
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
nptf 3rd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns 1st end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns 2nd end
The name and number of those parts furnished with the item of supply that have not been specified elsewhere.
2 short coupling nut and 2 cushion unit
Answers.
1EA
Uns 2nd end
Uns 1st end
Nptf 3rd end
Steel
18 1st end
18 2nd end
2a 2nd end
2a 1st end
Schedule B number: 7307992000
Other fittings nesoi of iron or nonalloy steel
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-00-139-3812 TEE,PIPE TO TUBE
uns 2nd end thread series cadmium outside surface treated supports clark model 290m; tractor, wheeled, ind., diesel driven; med dbp, nsn 2420000889384, w/rops nsn 2420010590090 18 1st end thread quantity per inch 2a 2nd end thread class
- NIIN
- 001393812
- NIIN Date
- 09/01/71
- Schedule B
- 7307992000
- Name Code
- 03807
- FIIG
- A080B0
- QUP
- 1
- Historical Price
- $2.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Republic of Korea
Availability for R1200-10 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other tees with similar characteristics
Nothing similar to this part number was found in our inventory
R1200-10 / Tee,pipe to tubeWhat is the formal definition of this item?
A fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. the pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. the tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. it may have side inlet(s). it is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
