Used on los angeles class ssn (688i). 2b thread class right-hand 1.110" thread length 1.750" overall length gland nut nha operator assembly, slide valve stbd; material spec astm B150, aly-C63200; protrusions have 0.50 in. between them, are 0.19 in. in height round, internal thread, shouldered
Used on ship; ground support equipment. 3a all ends thread class 2.666" overall length self sealing quick disconnect self sealing fitting used on fuel system; item dyed blue anodize body surface treated male coupling half unf all ends thread series
Used on ship; ground support equipment. 3a all ends thread class 2.727" overall length self sealing quick disconnect self sealing fitting used on fuel system; body dyed blue, sleeve dyed yellow anodize body surface treated male coupling half unf all ends thread series
Used on contractor logistics lifetime support (crls), hydraulic excavator type 2 (hyex) (model 230 lcrd hx2) nsn:3805-01-463-0806, tm5-3805-280-24-p. oil manifold
Used on f/a-18e. (navy) tee, tube, aircraft material tee-reduced flare, alluminum alloy with ivd per mil-c-83488 class 3 type ii; tubing sized 0.875 twice
Used on r.o unit, port; wsd los angeles class ssn (688). fitting, straight end low pressure application; fig a type i end fitting npsh 1st end thread series
Used on ALQ-99. 3a all ends thread class 1.900" overall length 16 all ends thread quantity per inch nipple assembly anodized gray; consists of 1ea of the following parts, nipple, poppet subassy, valve spring, retainer, valve guide, o-ring, anodize body surface treated male coupling half unjf all ends thread series
Used on sh-2g seasprite helicopter. fitting assembly-hydraulic system winch fitting assembly consists of part no. K882007-013, bolt, 1.000 in. dia. by 1.200 in., part number K882001-015 fitting 0.500 by 1.200 by 2.000 in., 2 o-rings, part number MS28775-014
Used on r.o. unit, port; wsd los angeles class ssn (688). flange, straight end low pressure application; type a group iii end fitting npsh 1st end thread series
Used on reverse osmosis unit port; wsd los angeles classssn 688. orifice ftg & snd attenuator working pressure 5100 psi; assembly includes nut, nicu, qq-n-281, pc. NO56a, 1pc.; orifice, nicu, qq-n-281, pc. no 11a; o-ring, rubber, mil-g-23652 type 11, 1pc.; 0.250 ips
Used on piping 4000 gpd seawater-brine-perm port; use los angeles class ssn 688. 0.1910" inside diameter material includes nickel; 1.000 nsp; drill orifice to 0.1910 in. diameter; flange face shall have a finish with a circular lay; wp, 150 psi; fitting to be used on inboard connection of backup valve
Used on hydraulic system,misc;f/a-18e/f. (navy) tee, tube, aircraft material tee-reducer, swivel nut on run & side; temp -65deg f to +275deg f; 5000 psi; nut & body titanium 6A1-4v ams 4965 & wire-cres; male end on run size 6, swivel nut on run size 4, swivel nut on side size 6
Used on f18 e/f. 3a 3rd end thread class 20 1st end thread quantity per inch tee-reducer, swivel nut on run operating pressure - 5000 psi ; additional item - wire (cres iaw ams 5637) ; finish - nut internally coated with solid film lubricant mil-l-46010, wire passivated iaw qq-p-35 unjs all ends thread series
Used on hydraulic installations;f/a-18e/f. (navy) tee, tube, aircraft material ree-reducer dynamic beam (male) 5, 000 psi; smallest end on run 3/8inch, opposite end 1/2inch & side end 1/2inch; titanium alloy-heat treated
Used on f18 e/f. 3a 3rd end thread class 14 2nd end thread quantity per inch tee-reducer, swivel nut on run operating pressure - 5000 psi ; additional item - wire (cres iaw ams 5637) ; finish - nut internally coated with solid film lubricant mil-l-46010, wire passivated iaw qq-p-35 unjs all ends thread series
