Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 401832-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a 2nd end
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b inlet
The number of bolt holes provided on the item.
4 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
external seat for gasket seal (boss) 2nd end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
gasket seal (boss) inlet
A measurement of the longest dimension of the leg,in distinction from width.
4.890in. 1st end
A measurement of the longest dimension of the leg,in distinction from width.
4.890in. 2nd end
A measurement of the longest dimension of the leg,in distinction from width.
4.890in. inlet
The physical configuration of the flange.
round with holes 1st end
Indicates the type of connection/s/.
flange 1st end
Indicates the type of connection/s/.
threaded external boss 2nd end
Indicates the type of connection/s/.
threaded internal boss inlet
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16 2nd end
Indicates the location of the inlet on the item.
high heel single inlet
A designation that is used for the purpose of general identification of the thread.
3.000in. 2nd end ⁓2-1/64"
A designation that is used for the purpose of general identification of the thread.
0.438in. inlet ⁓29/64"
The angle that the flow is turned from the straight flow.
90.0 degrees
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.
4.500in. 1st end
A nominal measurement of the smallest dimension of an item,in distinction from length or width.
0.156in. 1st end
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.
0.213in. 1st end
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.
3.812in. 1st end
The design of the flange face.
raised straight 1st end
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.
1.060in. 1st end
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.
3.080in. 1st end
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 flange
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024 sleeve
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 6061 elbow
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-225/6 fed spec single material response flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize flange
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize sleeve
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, tyii, cli mil spec single treatment response flange
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, tyii, cli mil spec single treatment response sleeve
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un 2nd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf inlet
Answers.
1EA
Unjf inlet
Un 2nd end
Aluminum alloy 6061 elbow
Aluminum alloy 2024 sleeve
Aluminum alloy 2024 flange
16 2nd end
4 1st end
3b inlet
2a 2nd end
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-268-2416 ELBOW,FLANGE TO BOSS
unjf inlet thread series anodize sleeve surface treated 16 2nd end thread quantity per inch 4 1st end bolt hole quantity 3b inlet thread class
- NIIN
- 012682416
- NIIN Date
- 11/26/87
- Schedule B
- Name Code
- 29665
- FIIG
- A080B0
- Item Weight
- 0.700lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $3,264.43 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 401832 | Cage 08118 |
| 2. | 401832 | Cage 08118 |
| 3. | 401832 | Cage 08118 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - Department of The Air Force
- - Republic of Korea
Availability for 401832-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 051400 PIPE FITTINGS ALUMINUM
- UFC (universal freight code)
- 29700
Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
401832-1 / Elbow,flange to bossWhat is the formal definition of this item?
A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. it has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. the other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side and/or heel inlet(s).
