AS5172W0812L

AS5172W0812L Boss Reducer
Home » Catalog » Fittings (p. 338) » Boss Reducers (p. 3) » Part Number AS5172W0812L

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. AS5172W0812L specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3a 2nd end

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

3b 1st end

Reducer Type
Refers to the location of the ends whether on the same centerline (concentric) or on different centerlines (eccentric).

concentric

Connection Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.

flareless (tube) 2nd end

Connection Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.

gasket seal (boss) 1st end

Connection Type
Indicates the type of connection/s/.

threaded external boss 2nd end

Connection Type
Indicates the type of connection/s/.

threaded internal boss 1st end

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

12 2nd end

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

16 1st end

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.750in. 1st end ⁓1/64"

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

1.062in. 2nd end ⁓2-1/64"

Seat Angle
The angle of the end surface upon which the mated surface seats.

37.0 degrees 2nd end

Nominal Outside Diameter Tube Accommodated
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.

0.500in. 1st end

Nominal Outside Diameter Tube Accommodated
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.

0.750in. 2nd end

Reduced Passage Nominal Inside Diameter
The nominal length of a straight line which passes through the center of the reduced passage,and terminates at the inside circumference.

0.609in. 2nd end

Nominal Overall Length
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.230in.

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-225/9 fed spec single material response or ams 4124 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

anodize

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

AMS2472 assn std single treatment response or MIL-A-8625, type ii, class 2 mil spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf 2nd end

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unjf 1st end

Answers.

What class is the thread series?

Unjf 1st end

What class is the thread series?

Unjf 2nd end

What material is the boss reducer made of ?

Aluminum alloy

What is the thread quantity per inch?

16 1st end

What is the thread quantity per inch?

12 2nd end

What is the thread class?

3b 1st end

What is the thread class?

3a 2nd end

What is the NSN for AS5172W0812L?

4730-01-578-1870

What's the federal classification of AS5172W0812L?

FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings

Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).

NSN 4730-01-578-1870 REDUCER,BOSS

unjf 1st end thread series anodize surface treated 16 1st end thread quantity per inch 3b 1st end thread class

NIIN
015781870
NIIN Date
09/29/09
Schedule B
 
Name Code
23541
FIIG
A080B0
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. AN893-16W Cage 88044

Major End Users Countries and entities

  • - Australia 
  • - Canada 
  • - Republic of Korea 

Availability for AS5172W0812L A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other reducers with similar characteristics

Nothing similar to this part number was found in our inventory

AS5172W0812L / Reducer,bossWhat is the formal definition of this item?

A straight fitting having a boss connection of a different size at each end. both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. excludes bushing (as modified).