Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AS4807T10 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a 1st end
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3b 2nd end
The national stock number or the identification information of the end equipment for which the item is a part.
F-35 aircraft
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
gasket seal (tube) 1st end
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.
swivel nut, gasket seal (tube) 2nd end
Indicates the type of connection/s/.
threaded external boss 1st end
Indicates the type of connection/s/.
threaded internal tube 2nd end
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 all ends
The maximum pressure at which the item is rated for operation.
5000.0 pounds per square inch single response
A designation that is used for the purpose of general identification of the thread.
0.8438in. all ends ⁓27/32"
The angle that the flow is turned from the straight flow.
90.0 degrees
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.625in. 2nd end
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R56400
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unj all ends
Answers.
Unj all ends
Titanium alloy uns r56400
18 all ends
3b 2nd end
3a 1st end
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-620-2058 ELBOW,BOSS
Used on f-35 aircraft. unj all ends thread series 18 all ends thread quantity per inch 3b 2nd end thread class
- NIIN
- 016202058
- NIIN Date
- 07/09/13
- Schedule B
- Name Code
- 22676
- FIIG
- A080B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for AS4807T10 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 052190 PIPE,TUBING,OR PIPE OR TUBING FITTI
- UFC (universal freight code)
- 30000
Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
AS4807T10 / Elbow,bossWhat is the formal definition of this item?
A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. the boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. excludes elbow, tube.
