Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 4M10C8OML0-SS specification
The national stock number or the identification information of the end equipment for which the item is a part.
an/SPN-41A
Indicates the type of connection/s/.
threaded external boss all ends
The maximum pressure at which the item is rated for operation.
3600.0 pounds per square inch single response
A designation that is used for the purpose of general identification of the thread.
10.0 mm 2nd end
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
1.5 2nd end
The angle that the flow is turned from the straight flow.
90.0 degrees
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.
0.250in. all ends
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material 316 stainless steel; 1st end grooved for oring, 2nd end has locknut and external oring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting body
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
iso m 2nd end
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m 1st end
Answers.
1EA
M 1st end
Iso m 2nd end
Steel corrosion resisting body
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-562-4619 ELBOW,BOSS
Used on an/spn-41a. m 1st end thread series material 316 stainless steel; 1st end grooved for oring, 2nd end has locknut
- NIIN
- 015624619
- NIIN Date
- 04/09/08
- Schedule B
- Name Code
- 22676
- FIIG
- A080B0
- QUP
- 1
- Historical Price
- $33.48 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 4M10C8OML0-SS A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 052190 PIPE,TUBING,OR PIPE OR TUBING FITTI
- UFC (universal freight code)
- 30000
Similar by Design Other elbows with similar characteristics
Nothing similar to this part number was found in our inventory
4M10C8OML0-SS / Elbow,bossWhat is the formal definition of this item?
A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. the boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. it may have side or heel inlet(s). it is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. excludes elbow, tube.
