Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS16535-90 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.181in. and 0.195in. ⁓13/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
oval/truss
A measurement from the bottom to the top of the head,in distinction from depth.
0.020in. and 0.026in. ⁓1/32"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.062in. and 0.066in. ⁓5/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.085in. and 0.089in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
tubular
0.142in. and 0.152in.
A measurement between specified points of the hole,in distinction from height.
0.047in. and 0.078in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
45000 double pounds per square inch
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281 fed spec single material response
Answers.
1EA
Nickel alloy 400
45000 double pounds per square inch
0.062 inches minimum and 0.066 inches maximum
Oval/truss
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
NSN 5320-00-855-0559 RIVET,TUBULAR
45000 double pounds per square inch shear strength 0.062" hole diameter oval/truss head style
- NIIN
- 008550559
- NIIN Date
- 01/01/62
- Schedule B
- 7508900000
- Name Code
- 00863
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $0.30 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS20450C6M6 | Cage 96906 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Army
- - Republic of Korea
- - Portugal
- - Greece
Availability for MS16535-90 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal and metal products, nos, (less than 35 feet)
- NMFC (national motor freight code)
- 139820 NICKEL BOLTS/NAILS/NUTS/RIVETS ETC
- UFC (universal freight code)
- 70220
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS16535-90 / Rivet,tubularWhat is the formal definition of this item?
A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion.
