Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. FF-R-556D specification
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.219in. ⁓7/32"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
oval/truss
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.015in. and 0.019in. ⁓1/32"
Hole Diameter
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.039in. and 0.044in. ⁓3/64"
Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.058in. and 0.061in.
Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
tubular
Head Major Diameter
0.104in. and 0.114in.
Hole Depth
A measurement between specified points of the hole,in distinction from height.
A measurement between specified points of the hole,in distinction from height.
0.046in.
Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
49000 double pounds per square inch
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281- temper o, cl a fed spec single material response
Nondefinitive Spec/std Data
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
12 type and 3 class and b grade
Answers.
What quantity is this sold in?
1LB
What material is the tubular rivet made of ?
Nickel alloy 400
What is the shear strength?
49000 double pounds per square inch
What is the inside hole diameter?
0.039 inches minimum and 0.044 inches maximum
What is the head style?
Oval/truss
How is this classified for shipping?
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
What's the federal classification of FF-R-556D?
FSC 5320 ⁓ Rivets
NSN 5320-01-218-4578 RIVET,TUBULAR
49000 double pounds per square inch shear strength 0.039" hole diameter oval/truss head style
- NIIN
- 012184578
- NIIN Date
- 10/12/85
- Schedule B
- 7508900000
- Name Code
- 00863
- FIIG
- A040A0
- Item Weight
- 1.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,214.13 LB
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS16535-35 | Cage 80205 |
| 2. | MS16535-35 | Cage 96906 |
| 3. | MS16535-35 | Cage 80205 |
| 4. | MS16535-35 | Cage 96906 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Department of The Navy
Availability for FF-R-556D A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 139820 NICKEL BOLTS/NAILS/NUTS/RIVETS ETC
- UFC (universal freight code)
- 70220
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
FF-R-556D / Rivet,tubularWhat is the formal definition of this item?
A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion.
