Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. FF-R-556 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.094in. ⁓3/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
oval/truss
A measurement from the bottom to the top of the head,in distinction from depth.
0.015in. and 0.019in. ⁓1/32"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.039in. and 0.044in. ⁓3/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.058in. and 0.061in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
tubular
0.104in. and 0.114in.
A measurement between specified points of the hole,in distinction from height.
0.046in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
35000 double pounds per square inch
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 260 or copper alloy 270
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-W-321 fed spec all material responses
Identification of the precious material contained in the item.
silver
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
oxide
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-F-495 mil spec single treatment response
The technical differentiating characteristic/s/ of an item of supply which depart/s/ from the text of a specification or a standard in that it represents a selection of characteristics stated in the specification or standard as being optional,or a variation from one or more of the stated characteristics,or an additional characteristic not stated in the specification or standard.
as modified by precious material
Answers.
Copper alloy 260 or copper alloy 270
35000 double pounds per square inch
0.039 inches minimum and 0.044 inches maximum
Oval/truss
Schedule B number: 7415290000
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5320 ⁓ Rivets
NSN 5320-01-171-0653 RIVET,TUBULAR
oxide surface treated 35000 double pounds per square inch shear strength 0.039" hole diameter oval/truss head style
- NIIN
- 011710653
- NIIN Date
- 02/03/84
- Schedule B
- 7415290000
- Name Code
- 00863
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS16353-11SILVERPLATEM35 | Cage 96906 |
| 2. | 5954080 | Cage S0522 |
Major End Users Countries and entities
- - Germany
Availability for FF-R-556 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
FF-R-556 / Rivet,tubularWhat is the formal definition of this item?
A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion.
