Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 92432103101 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.078in. and 0.110in. ⁓1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
oval/truss
A measurement from the bottom to the top of the head,in distinction from depth.
0.015in. and 0.019in. ⁓1/32"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.039in. and 0.044in. ⁓3/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.058in. and 0.061in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
tubular
0.104in. and 0.114in.
A measurement between specified points of the hole,in distinction from height.
0.046in.
The national stock number or the identification information of the end equipment for which the item is a part.
truck, fl, M10A
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
rivet, tubular
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
engine instrument; oval head, tubular rivet
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-B-626, com+22 fed spec single material response
Answers.
1EA
Copper alloy
0.039 inches minimum and 0.044 inches maximum
Oval/truss
Schedule B number: 7415290000
nmfc 106510
Copper screws, nuts, bolts, rivets, and other fasteners not threaded
FSC 5320 ⁓ Rivets
NSN 5320-01-467-5686 RIVET,TUBULAR
Used on truck, fl,m10a. engine instrument; oval head, tubular rivet rivet, tubular 0.039" hole diameter oval/truss head style
- NIIN
- 014675686
- NIIN Date
- 09/03/99
- Schedule B
- 7415290000
- Name Code
- 00863
- FIIG
- A040A0
- QUP
- 1
- Historical Price
- $2.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
Availability for 92432103101 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
92432103101 / Rivet,tubularWhat is the formal definition of this item?
A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion.
