Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 279-020-0005 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.244in. ⁓1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.088in. and 0.098in. ⁓7/64"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.141in. and 0.146in.
The length of the enlarged portion/s/ located on the shank of the item.
0.098in. and 0.103in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.120in. and 0.123in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
hollow shank w/shoulder
0.239in.
A measurement between specified points of the hole,in distinction from height.
0.085in. and 0.100in.
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
1/2 hard; option: straight hole or tapered
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 5056
Answers.
1EA
Aluminum alloy 5056
0.088 inches minimum and 0.098 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
nmfc 106510
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-00-406-5459 RIVET,TUBULAR
1/2 hard; option: straight hole or tapered 0.088" hole diameter flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 004065459
- NIIN Date
- 04/15/70
- Schedule B
- 7616103000
- Name Code
- 00863
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $2.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
Availability for 279-020-0005 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
279-020-0005 / Rivet,tubularWhat is the formal definition of this item?
A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion.
