Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 13217E1157 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.620in. and 0.654in. ⁓21/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
A measurement from the bottom to the top of the head,in distinction from depth.
0.068in. and 0.082in. ⁓3/32"
The length of a straight line which passes through the center of a hole,and terminates at the circumference.
0.142in. and 0.149in. ⁓5/32"
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.
0.232in. and 0.240in.
The length of the enlarged portion/s/ located on the shank of the item.
0.323in. and 0.333in.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.190in. and 0.195in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
hollow shank w/shoulder
0.378in. and 0.392in.
A measurement between specified points of the hole,in distinction from height.
0.250in.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
32000 pounds per square inch
The included angle of the countersink.
100.0 degrees
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
Answers.
1EA
Steel
0.142 inches minimum and 0.149 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7318230000
nmfc 106510
Rivets of iron or steel
FSC 5320 ⁓ Rivets
NSN 5320-00-003-6954 RIVET,TUBULAR
0.142" hole diameter flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 000036954
- NIIN Date
- 05/26/72
- Schedule B
- 7318230000
- Name Code
- 00863
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $32.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
Availability for 13217E1157 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
13217E1157 / Rivet,tubularWhat is the formal definition of this item?
A headed fastening device having a smooth shank which is hollow or having a cavity at its end and designed to have the shank clinched after insertion.
