Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. PFP-632-1 specification
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.290in. ⁓19/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.290in. ⁓19/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
star knob
A measurement from the bottom to the top of the head,in distinction from depth.
0.436in. ⁓7/16"
0.542in.
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.138in. (UTS #6)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
SELF-Clinching panel fastener
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
no. 2 cross recess drive
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.
black head
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic abs head
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel STAND-Off
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel threads
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
Unc
Steel threads
Steel stand-off
Plastic abs head
32
Star knob
0.290 inches
Right-hand
FSC 5305 ⁓ Screws
NSN 5305-01-612-2419 THUMBSCREW
unc thread series no. 2 cross recess drive self-clinching panel fastener 32 thread quantity per inch star knob head style 0.290" thread length right-hand
- NIIN
- 016122419
- NIIN Date
- 10/05/12
- Schedule B
- Name Code
- 06673
- FIIG
- A003B0
- QUP
- Historical Price
- $7.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for PFP-632-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other thumbscrews with similar characteristics
Nothing similar to this part number was found in our inventory
PFP-632-1 / ThumbscrewWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
