NSCH-329-001-03

NSCH32900103 Thumbscrew

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. NSCH-329-001-03 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

2a

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.900in. and 1.023in. ⁓1-1/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

1.100in. and 1.223in. ⁓1-15/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

knurled no. 1

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

1.000in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.297in. and 0.390in. ⁓25/64"

Point Length
A measurement of the longest dimension of the point,in distinction from width.

0.200in.

Point Diameter
The length of a straight line which passes through the center of a circular point,and terminates at the circumference.

0.185in.

Point Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.

universal

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.250in. ⁓1/4"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

20

Point Swivel Included Angle

9.0 degrees

Point Chamfer Angle

80.0 degrees

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 or steel comp 302 or steel comp 303 or steel comp 303f or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 323 or steel comp 324 or steel comp 347 or steel comp 348 or steel comp 385 or steel comp 302b or steel comp 384

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc

Answers.

What quantity is this sold in?

1EA

What class is the thread series?

Unc

What material is the thumbscrew made of ?

Steel comp 301 or steel comp 302 or steel comp 303 or steel comp 303f or steel comp 303se or steel comp 304 or steel comp 304l or steel comp 305 or steel comp 308 or steel comp 309 or steel comp 309s or steel comp 310 or steel comp 310s or steel comp 314 or steel comp 316 or steel comp 316l or steel comp 317 or steel comp 321 or steel comp 323 or steel comp 324 or steel comp 347 or steel comp 348 or steel comp 385 or steel comp 302b or steel comp 384

What is the thread quantity per inch?

20

What is the head style?

Knurled no. 1

What is the thread length?

0.900 inches minimum and 1.023 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

2a

What is the NSN for NSCH-329-001-03?

5305-01-044-8519

How is this classified for shipping?

Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of NSCH-329-001-03?

FSC 5305 ⁓ Screws

NSN 5305-01-044-8519 THUMBSCREW

unc thread series 20 thread quantity per inch knurled no. 1 head style 0.900" thread length right-hand 2a thread class

NIIN
010448519
NIIN Date
07/22/77
Schedule B
7318152000 
Name Code
06673
FIIG
A003B0
Item Weight
0.000lbs
Item Dimensions
--
QUP
Historical Price
$25.08 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Metal content unknown
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

1. 44652 Cage 96027
2. 11565975 Cage 18876

Major End Users Countries and entities

  • - Department of The Army 

Availability for NSCH-329-001-03 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
Rating variable 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3) 
UFC (universal freight code)
48950 

Similar by Design Other thumbscrews with similar characteristics

Nothing similar to this part number was found in our inventory

NSCH-329-001-03 / ThumbscrewWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).