Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A6029-832-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.250in. ⁓1/4"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.375in. ⁓3/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
knurled no. 1
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.500in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.250in. ⁓1/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
pointless
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
1EA
Unf
Steel
24
Knurled no. 1
0.250 inches
Right-hand
2a
Schedule B number: 7318152000
nmfc 013120
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-00-545-4631 THUMBSCREW
unf thread series 24 thread quantity per inch knurled no. 1 head style 0.250" thread length right-hand 2a thread class
- NIIN
- 005454631
- NIIN Date
- 01/01/63
- Schedule B
- 7318152000
- Name Code
- 06673
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $0.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
- - Republic of Korea
- - Greece
Availability for A6029-832-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 100.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 013120 ALUMINUM ARTICLE NOI SUB 6
- UFC (universal freight code)
- 05380
Similar by Design Other thumbscrews with similar characteristics
Nothing similar to this part number was found in our inventory
A6029-832-1 / ThumbscrewWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
