Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A3036412-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.340in. ⁓11/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.370in. ⁓3/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
knurled no. 2
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.750in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.500in. ⁓1/2"
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.500in. first shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.250in. first shoulder
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
flat
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.138in. (UTS #6)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
straight knurl head
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303 or steel comp 303ma or steel comp 303 plus x or steel comp 303se or steel comp 416 or steel comp 416 plus x or steel comp 416se or steel comp 420f or steel comp 420fse or steel comp 430f or steel comp 430fse
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A582 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-F-14072 E300 mil spec single treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
Unc
Steel comp 303 or steel comp 303ma or steel comp 303 plus x or steel comp 303se or steel comp 416 or steel comp 416 plus x or steel comp 416se or steel comp 420f or steel comp 420fse or steel comp 430f or steel comp 430fse
32
Knurled no. 2
0.340 inches minimum
Right-hand
2a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-231-7392 THUMBSCREW
unc thread series passivate surface treated straight knurl head 32 thread quantity per inch knurled no. 2 head style 0.340" thread length right-hand 2a thread class
- NIIN
- 012317392
- NIIN Date
- 05/03/86
- Schedule B
- 7318152000
- Name Code
- 06673
- FIIG
- A003B0
- QUP
- Historical Price
- $3.15 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for A3036412-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other thumbscrews with similar characteristics
Nothing similar to this part number was found in our inventory
A3036412-1 / ThumbscrewWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
