Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 91830A719 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.0in. ⁓1/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.0in. ⁓2-1/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
knurled no. 2
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
1.375in.
A measurement from the bottom to the top of the head,in distinction from depth.
1.0in. ⁓1/64"
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.750in. first shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.687in. first shoulder
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.
pointless
The national stock number or the identification information of the end equipment for which the item is a part.
F-15Sa
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.375in. ⁓3/8"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
16
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
knurled head thumb screw
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel property class 18.8
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Answers.
Unc
Steel property class 18.8
16
Knurled no. 2
1.0 inches
Right-hand
2a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-642-7753 THUMBSCREW
Used on F-15SA. unc thread series knurled head thumb screw 16 thread quantity per inch knurled no. 2 head style 1.0" thread length right-hand 2a thread class
- NIIN
- 016427753
- NIIN Date
- 03/09/15
- Schedule B
- 7318152000
- Name Code
- 06673
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code )
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- --
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 91830A719 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other thumbscrews with similar characteristics
Nothing similar to this part number was found in our inventory
91830A719 / ThumbscrewWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter. it may have an unthreaded portion with a diameter less than, equal to, or greater than the diameter of the threaded portion. it has either a vertically flattened, circular knurled, or wing type head, all of which are designed for rotation by the thumb and fingers. for items having wrenching facilities such as socket recess, multiple spline or slot heads, use screw (as modified) or bolt (as modified).
