7603719 Square Neck Bolt

Datasheet. 7603719 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

0.406in. and 0.469in. ⁓15/32"

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

0.766in. and 0.797in. ⁓51/64"

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

flat chamfer

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

0.484in. and 0.500in.

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

0.359in. and 0.391in. ⁓13/32"

Neck Length
A measurement of the longest dimension of the neck,in distinction from width.

0.172in. and 0.203in.

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

0.312in. ⁓5/16"

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Neck Width
A measurement taken at right angles to the length of the neck,in distinction from thickness.

0.494in. and 0.496in.

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

head end drilled and tapped 1/4-20 UNC-2B by 0.375 in. deep

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 303

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-S-763 fed spec single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

passivate

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

unc

Answers.

What class is the thread series?

Unc

What material is the square neck bolt made of ?

Steel comp 303

What is the thread quantity per inch?

What is the head style?

Flat chamfer

What is the thread length?

0.406 inches minimum and 0.469 inches maximum

What is the thread direction?

Right-hand

What is the thread class?

What is the NSN for 7603719?

5306-00-760-3719

How is this classified for shipping?

Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment

What's the federal classification of 7603719?

FSC 5306 ⁓ Bolts

7603719

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Datasheet. 7603719 specification

Answers.

NSN 5306-00-760-3719 BOLT,SQUARE NECK

Major End Users Countries and entities

Availability for 7603719 A member of our team will provide you with a price and availability quote

Similar by Design Other bolts with similar characteristics

7603719 / Bolt,square neckWhat is the formal definition of this item?