Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NASM5674 specification
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.240in. and 0.260in. ⁓17/64"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.124in. and 0.128in.
Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight w/radius chamfered tip
Head Major Diameter
0.221in. and 0.229in.
Grip Length
A measurement of the longest dimension of the grip,in distinction from width.
A measurement of the longest dimension of the grip,in distinction from width.
0.062in.
Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
26000 single pounds per square inch
Countersink Angle
The included angle of the countersink.
The included angle of the countersink.
99.5 degrees and 100.5 degrees
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2117
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430 fed spec single material response
Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize or oxide film
Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response or MIL-C-5541 mil spec 2nd treatment response
Answers.
What quantity is this sold in?
1LB
What material is the solid rivet made of ?
Aluminum alloy 2117
What is the shear strength?
26000 single pounds per square inch
What is the grip length?
0.062 inches
What is the head style?
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
How is this classified for shipping?
Schedule B number: 7616103000
nmfc 013630
Aluminum rivets
What's the federal classification of NASM5674?
FSC 5320 ⁓ Rivets
NSN 5320-00-117-6949 RIVET,SOLID
anodize or oxide film surface treated 26000 single pounds per square inch shear strength 0.062" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 001176949
- NIIN Date
- 01/01/63
- Schedule B
- 7616103000
- Name Code
- 00861
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $30.65 LB
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AS2229-404 | Cage U1653 |
| 2. | 411172-288 | Cage 96214 |
| 3. | B82286 | Cage K0967 |
| 4. | 5-4-1313-3-19 | Cage 81337 |
| 5. | MS20426AD4-4 | Cage 80205 |
| 6. | 305-1373-000 | Cage 13499 |
| 7. | MS20426AD4-4 | Cage 2N935 |
| 8. | MS20426AD4-4 | Cage 8J942 |
| 9. | 413719-085 | Cage 02964 |
| 10. | 585607 | Cage 00000 |
| 11. | MS20426AD4-4 | Cage 96906 |
| 12. | AN426AD4-4 | Cage 88044 |
| 13. | MILR5674 | Cage 81349 |
| 14. | AN426AD4-4 | Cage 81352 |
| 15. | 10123493 | Cage A486G |
| 16. | MILR5674 | Cage 80205 |
| 17. | 5-4-1313-3-19 | Cage 05699 |
| 18. | 413719-085 | Cage 0NWN1 |
| 19. | AS2229-404 | Cage 0U583 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - U.s. Marine Corps
- - U.s. Coast Guard
- - Austria
- - Finland
- - Poland
- - Slovenia
- - Bulgaria
- - Slovakia
- - Brazil
- - Spain
- - Singapore
- - Kuwait
- - Malaysia
- - Australia
- - Belgium
- - Canada
- - New Zealand
- - France
- - Germany
- - Republic of Korea
- - United Kingdom
- - Philippines
- - Netherlands
- - Portugal
- - Italy
- - Denmark
- - Norway
- - Greece
- - Turkey
- - Nato Maintenance And Supply Agency
Major End Items End use applications
- - Missile, tomahawk
- - Support equipment, b-1 aircraft
- - Aircraft, sof ( ac-130h, mc-130h, ec-130e, hc-130)
- - Aircraft, c-2a (reprocured)
- - Helicopter, mh-53e
- - Helicopter, advance attack, ah-1w
- - Integrated launch & recovery tv surveillance sys (ilarts)
- - Aircraft, airlifter c-17a
- - Helicopter, sof / hh-53j/m pave low
- - Oh 58d ahip (army helicopter improvement program) helicopter
- - Helicopter,attack
- - Vpa assembly
- - Transponder set
- - Meter,noise level
- - Circuit card assembly
- - Helicopter,attack
- - Test set,radio
- - Barometer,mercurial
- - Shelter,nonexpandable
- - Test set,radio
- - Helicopter,attack
- - Console monitor,int
- - Synchrophaser assem
- - Cover,lamp
- - Speech equipment
- - Test set,electronic systems
- - Electronic components assembly
- - Mounting base,electrical equipment
- - Central office,telephone,automatic
- - Helicopter,observation
- - Module,wind
- - Test set,radar
- - Test set,radio
- - Switching set,commu
- - Generator set,gas t
- - Receiver-transmitter,radio
- - Control assembly,landing gear
- - Receiver-transmitter,radio
- - Engine,gas turbine
- - Seat,aircraft
- - Module,integrator
- - Receiver-transmitter,radio
- - Reflector,light
- - Receiver-transmitter,radio
- - Light,navigational,aircraft
- - Receiver-transmitter,radio
- - Receiver-transmitter,radio
- - Actuator,electro-mechanical,rotary
- - Test set,fuel control system
- - Receiver-transmitter group
- - Test set,electrical power
- - Encoder-decoder
- - Valve assembly,environmental control,aircraft
- - Test set,night visi
- - Case,coder-decoder
- - Receiver-transmitter,radio
- - Encoder-decoder
- - Indicator group
- - Bracket,angle
- - Door,access,aircraft
- - Valve,butterfly
- - Compressor unit,reciprocating
- - Fuel encl cov assy
- - Console monitor,int
- - Power supply
- - Air conditioner
- - Cowling
- - Valve,butterfly
- - Indicator,radar target
- - Repair kit,tube per
- - Processor,communica
- - Valve,butterfly
- - Valve,butterfly
- - Pedestal,aircraft
- - Receiver-transmitter,radio
- - Translator,signal data
- - Computer,digital
- - Direction finder set
- - Receiver-transmitter,radio
- - Plug-in unit,electrical-electronic test equipment
- - Telephone set
- - Receiver-transmitter,radio
- - Flasher,thermal
- - Mounting base,electrical equipment
- - Helicopter,attack
- - Central office,tele
- - Power supply
- - Mounting base,electrical equipment
- - Voice terminal
- - Mounting base,electrical equipment
- - Computer go&round a
- - Dispenser subassembly,countermeasures
- - Mounting base,electrical equipment
- - Destruct safety ass
- - Helicopter,attack
- - Translator,signal data
- - Mounting base,electrical equipment
- - Transport,magnetic tape
- - Receiver-transmitter,radio
- - Control assembly,landing gear
- - Coder,transponder set
- - Power supply
- - Power supply
- - Air conditioner
- - Gas storage assembl
- - Valve,butterfly
- - Adapter assembly,interface device
- - Panel,control,electrical-electronic equipment
- - Power supply
- - Valve,flow control,
- - Blanker,interference
- - Shelter,nonexpandable
- - Helicopter,cargo-transport
- - Terminal,communicat
- - Satellite communica
- - Interrogator set
- - Chassis,electrical-electronic equipment
- - Transmitter,radar
- - Power supply
- - Helicopter,observation
- - Water chiller
- - Plug-in unit,electrical-electronic test equipment
- - Counter,electronic,digital readout
- - Generator,pulse
- - Test set,control-monitor
- - Switch unit,local-r
- - Analyzer,electrical pulse
- - Computer,navigational
- - Central office,telephone,automatic
- - Power supply subassembly
- - Air conditioner
- - Anc key gen frame
- - Control assembly,landing gear
- - Modulator,radar
- - Protection and cont
- - Inverter,control
- - Cowling
- - Electronic components assembly
- - Test set,radar
- - Fixture,aircraft maintenance
- - Power supply subassembly
- - Regulator,voltage
- - Receiver-transmitter,radio
- - Power supply
- - Control assembly,landing gear
- - Regulator,voltage
- - Power supply subassembly
- - Air conditioner
- - Inverter,power,static
- - Air conditioner
- - Panel,building,prefabricated
- - Mounting base,electrical equipment
- - Regulator,voltage
- - Switch-amplifier,radio frequency
- - Receiver-transmitter,radio
- - Panel assembly,pres
- - Vertical accelerato
- - Position and azimut
- - Oscilloscope
- - Cowling
- - Converter,frequency,electronic
- - Test set,bench
- - Indicator,azimuth-range
- - Coder group
- - Generator,signal
- - Alarm set,pilot warning
- - Helicopter,attack
- - Helicopter,attack
- - Receiver-transmitter,radio
- - Rack,electrical equipment
Availability for NASM5674 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 013630 ALUM RIVETS
- UFC (universal freight code)
- 05720
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NASM5674 / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
