Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NASM20427 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.552in. and 0.572in. ⁓37/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.249in. and 0.253in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight w/radius chamfered tip
0.4412in. and 0.4890in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
49000 single pounds per square inch
The included angle of the countersink.
96.5 degrees and 101.5 degrees
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
annealed
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400 or nickel alloy R-405
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281 fed spec all material responses
Answers.
Nickel alloy 400 or nickel alloy r-405
49000 single pounds per square inch
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7508900000
nmfc 139820
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
NSN 5320-01-084-4808 RIVET,SOLID
49000 single pounds per square inch shear strength flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 010844808
- NIIN Date
- 10/19/79
- Schedule B
- 7508900000
- Name Code
- 00861
- FIIG
- A040A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $1.10 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MS20427M8-9 | Cage 80205 |
| 2. | AN427M8-9 | Cage 88044 |
| 3. | MS20427M8-9 | Cage 96906 |
Major End Users Countries and entities
- - Department of The Air Force
- - Brazil
- - Republic of Korea
Availability for NASM20427 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 85.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 139820 NICKEL BOLTS/NAILS/NUTS/RIVETS ETC
- UFC (universal freight code)
- 70220
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NASM20427 / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
