Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1200M8-6 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.365in. and 0.385in. ⁓25/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.249in. and 0.254in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight
0.3948in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
49000 single pounds per square inch
The included angle of the countersink.
99.0 degrees and 101.0 degrees
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
annealed
The chemical compound or mechanical mixture properties of which the item is fabricated.
nickel alloy 400
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-N-281 class a fed spec single material response
The document designator of the specification or standard which established the item of supply.
80205-NAS1200 professional/industrial association standard
Answers.
1EA
Nickel alloy 400
49000 single pounds per square inch
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7508900000
nmfc 096320
Other articles of nickel (excluding cloth, grill & netting of nickel wire)
FSC 5320 ⁓ Rivets
NSN 5320-01-442-8345 RIVET,SOLID
49000 single pounds per square inch shear strength flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 014428345
- NIIN Date
- 12/15/83
- Schedule B
- 7508900000
- Name Code
- 00861
- FIIG
- A040A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $0.85 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
Availability for NAS1200M8-6 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 096320 RIVETS I/S NICKEL PLATED BUFFED
- UFC (universal freight code)
- 50430
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1200M8-6 / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
