Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS20426T3 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.125in. ⁓1/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.093in. and 0.097in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight w/radius chamfered tip
0.175in. and 0.183in.
The national stock number or the identification information of the end equipment for which the item is a part.
f/A-18 cn aircraft
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
rivet has indented diamond on head with a 0.030 to 0.050 inch width and a 0.040 to a 0.070 inch length
The chemical compound or mechanical mixture properties of which the item is fabricated.
titanium alloy uns R58450
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4982 assn std single material response
Answers.
Titanium alloy uns r58450
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 8108908000
nmfc 106510
Other wrought titanium
FSC 5320 ⁓ Rivets
NSN 5320-01-469-1488 RIVET,SOLID
Used on f/a-18 cn aircraft. rivet has indented diamond on head with a 0.030 to 0.050 inch width flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 014691488
- NIIN Date
- 11/04/99
- Schedule B
- 8108908000
- Name Code
- 00861
- FIIG
- A040A0
- Item Weight
- lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $80.00 HD
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Availability for MS20426T3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- 50.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 106510 RIVETS I/S PLAIN/GALVANIZED ETC
- UFC (universal freight code)
- 54760
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS20426T3 / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
