Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS20426DD6-8D specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.490in. and 0.510in. ⁓33/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.186in. and 0.190in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight with tapered tip
0.349in. and 0.357in.
A measurement of the longest dimension of the chamfer,in distinction from width.
0.047in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.139in. and 0.143in.
The national stock number or the identification information of the end equipment for which the item is a part.
C130K
A measurement of the longest dimension of the grip,in distinction from width.
0.070in.
The included angle of the countersink.
99.5 degrees and 100.5 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
rivet, solid, cuntersunk 100 degree pricision head, aluminum and titanium columbium alloy
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
material:2024-T4 al alloy
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2024
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MS20426 mil spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625, type 2, class 1, dichromate seal mil spec single treatment response
Answers.
Aluminum alloy 2024
0.070 inches
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-01-604-6092 RIVET,SOLID
Used on C130K. anodize surface treated material:2024-T4 al alloy rivet, solid, cuntersunk 100 degree pricision head, aluminum 0.070" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 016046092
- NIIN Date
- 04/10/12
- Schedule B
- 7616103000
- Name Code
- 00861
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | NASM20426 | Cage 80205 |
Availability for MS20426DD6-8D A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS20426DD6-8D / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
