Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS20426AD8-44 specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
2.750in. ⁓2-3/4"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
A measurement from the bottom to the top of the head,in distinction from depth.
0.095in. ⁓7/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.246in. and 0.254in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight
0.472in. and 0.480in.
A measurement of the longest dimension of the grip,in distinction from width.
2.375in.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
26000 single pounds per square inch
The included angle of the countersink.
100.0 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
orange
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
T-4 solution heat treated
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2117
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430, T4 fed spec single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
anodize or oxide film
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-A-8625 mil spec 1st treatment response or MIL-C-5541 mil spec 2nd treatment response
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.
2117 composition and T4 condition and dimpled form
Answers.
Aluminum alloy 2117
26000 single pounds per square inch
2.375 inches
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-01-038-3442 RIVET,SOLID
anodize or oxide film surface treated orange 26000 single pounds per square inch shear strength 2.375" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 010383442
- NIIN Date
- 04/04/77
- Schedule B
- 7616103000
- Name Code
- 00861
- FIIG
- A040A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-R-5674 | Cage 81349 |
Major End Users Countries and entities
- - Germany
Availability for MS20426AD8-44 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS20426AD8-44 / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
