Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS20426AD3-12S specification
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.178in. and 0.198in. ⁓13/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
A measurement from the bottom to the top of the head,in distinction from depth.
0.036in. ⁓3/64"
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.093in. and 0.097in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight with tapered tip
0.175in. and 0.183in.
A measurement of the longest dimension of the chamfer,in distinction from width.
0.023in.
The length of a straight line which passes through the center of a circular tip,and terminates at the circumference.
0.064in. and 0.068in.
The national stock number or the identification information of the end equipment for which the item is a part.
stryker
A measurement of the longest dimension of the grip,in distinction from width.
0.142in. and 0.162in.
The included angle of the countersink.
99.5 degrees and 100.5 degrees
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
rivet, solid, countersunk
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy 2117
Answers.
1EA
Aluminum alloy 2117
0.142 inches minimum and 0.162 inches maximum
Flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer)
Schedule B number: 7616103000
nmfc 013630
Aluminum rivets
FSC 5320 ⁓ Rivets
NSN 5320-01-619-7696 RIVET,SOLID
Used on stryker. rivet, solid, countersunk 0.142" grip length flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style
- NIIN
- 016197696
- NIIN Date
- 06/17/13
- Schedule B
- 7616103000
- Name Code
- 00861
- FIIG
- A040A0
- QUP
- 1
- Historical Price
- $2.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for MS20426AD3-12S A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 013630 ALUM RIVETS
- UFC (universal freight code)
- 05720
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS20426AD3-12S / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
