Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. MS14218E8-20 specification
Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.240in. and 1.260in. ⁓1-17/64"
Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
countersunk w/ reverse chamfer
Head Height
A measurement from the bottom to the top of the head,in distinction from depth.
A measurement from the bottom to the top of the head,in distinction from depth.
0.0695in. ⁓5/64"
Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.249in. and 0.252in.
Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
straight w/radius chamfered tip
Head Major Diameter
0.358in.
Minimum Tensile Strength
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
68000 pounds per square inch
Minimum Yield Strength
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
The stress at which a material exhibits a specified limiting deviation from the proportionality of stress or strain.
58000 pounds per square inch
Shear Strength
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.
41000 single pounds per square inch
Countersink Angle
The included angle of the countersink.
The included angle of the countersink.
118.5 degrees and 121.5 degrees
Heat Treatment
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.
T-73 solution heat treated
Material
The chemical compound or mechanical mixture properties of which the item is fabricated.
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy
Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-A-430, alloy 7050 fed spec single material response
Answers.
What quantity is this sold in?
1LB
What material is the solid rivet made of ?
Aluminum alloy
What is the shear strength?
41000 single pounds per square inch
What is the head style?
Countersunk w/ reverse chamfer
How is this classified for shipping?
Schedule B number: 7616103000
nmfc 013630
Aluminum rivets
What's the federal classification of MS14218E8-20?
FSC 5320 ⁓ Rivets
NSN 5320-01-207-0114 RIVET,SOLID
41000 single pounds per square inch shear strength countersunk w/ reverse chamfer head style
- NIIN
- 012070114
- NIIN Date
- 04/26/85
- Schedule B
- 7616103000
- Name Code
- 00861
- FIIG
- A040A0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $191.63 LB
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
- - Spain
Availability for MS14218E8-20 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 013630 ALUM RIVETS
- UFC (universal freight code)
- 05720
Similar by Design Other rivets with similar characteristics
Nothing similar to this part number was found in our inventory
MS14218E8-20 / Rivet,solidWhat is the formal definition of this item?
A headed fastening device having a smooth solid shank designed to have the shank end upset after insertion.
