Serving our customers with quality and safety first.
2a nut thread
2a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.150in. stud thread ⁓5/32"
0.390in. nut thread ⁓25/64"
40 nut thread
40 stud thread
0.112in. nut thread ⁓1/8"
0.112in. stud thread ⁓1/8"
0.032 in. wide by 0.015 in. deep undercut at shoulder on stud end
copper alloy 260 or copper alloy 262 or copper alloy 268 or copper alloy 270 or copper alloy 272 or copper alloy 274 or copper alloy 280 or copper alloy 330 or copper alloy 331 or copper alloy 332 or copper alloy 335 or copper alloy 340 or copper alloy 342 or copper alloy 344 or copper alloy 345 or copper alloy 347 or copper alloy 348 or copper alloy 350 or copper alloy 353 or copper alloy 356 or copper alloy 360 or copper alloy 370 or copper alloy 462 or copper alloy 464 or copper alloy 465 or copper alloy 466 or copper alloy 467 or copper alloy 482 or copper alloy 485
unc nut thread
unc stud thread
1EA
Unc stud thread
Unc nut thread
Copper alloy 260 or copper alloy 262 or copper alloy 268 or copper alloy 270 or copper alloy 272 or copper alloy 274 or copper alloy 280 or copper alloy 330 or copper alloy 331 or copper alloy 332 or copper alloy 335 or copper alloy 340 or copper alloy 342 or copper alloy 344 or copper alloy 345 or copper alloy 347 or copper alloy 348 or copper alloy 350 or copper alloy 353 or copper alloy 356 or copper alloy 360 or copper alloy 370 or copper alloy 462 or copper alloy 464 or copper alloy 465 or copper alloy 466 or copper alloy 467 or copper alloy 482 or copper alloy 485
40 stud thread
40 nut thread
0.390 inches maximum nut thread
0.150 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
2a nut thread
FSC 5307 ⁓ Studs
unc stud thread thread series 0.032 in. wide by 0.015 in. deep undercut at shoulder on stud end 40 stud thread thread quantity per inch 0.390" nut thread thread length right-hand stud thread 2a stud thread thread class
1. | C62-503 | Cage 58133 |
2. | C62-503 | Cage 06275 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. all or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). it may be thread relieved. see also stud, locked in.