Serving our customers with quality and safety first.
3a nut thread
3a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.670in. stud thread and 0.690in. stud thread ⁓45/64"
0.720in. nut thread ⁓47/64"
0.480in. and 0.520in.
0.115in. and 0.125in.
1.880in. ⁓1-57/64"
0.330in. and 0.350in.
28 nut thread
28 stud thread
0.250in. nut thread ⁓1/4"
0.250in. stud thread ⁓1/4"
125.0 microinches
63.0 microinches shoulder bearing surface
0.310in.
2shoulder is D-Shaped with center to flat at 0.245 to 0.255 in.; groove located between shank and shoulder, 0.280 to 0.285 in.dia, 0.030 to 0.040 in. wide; groove located between shank and nut end thread, 0.221 to 0.231 in. dia, 0.270 in. max wide
nickel alloy
ams 7471 assn std single material response
shouldered
unjf nut thread
unjf stud thread
Unjf stud thread
Unjf nut thread
Shouldered
Nickel alloy
28 stud thread
28 nut thread
0.720 inches minimum nut thread
0.670 inches minimum stud thread and 0.690 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
unjf stud thread thread series shouldered 2shoulder is d-shaped with center to flat at 0.245 to 0.255 in.; groove located between shank 28 stud thread thread quantity per inch 1.880" overall length 0.720" nut thread thread length right-hand stud thread 3a stud thread thread class
1. | KB50884-4 | Cage 15653 |
2. | VFQ401-1 | Cage 06710 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. all or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). it may be thread relieved. see also stud, locked in.