Serving our customers with quality and safety first.
3a nut thread
3a stud thread
RIGHT-Hand nut thread
RIGHT-Hand stud thread
0.330in. stud thread and 0.400in. stud thread ⁓13/32"
0.380in. nut thread and 0.420in. nut thread ⁓27/64"
0.080in. and 0.110in.
0.350in. and 0.353in.
0.140in. and 0.160in.
1.990in. and 2.030in. ⁓2-1/32"
0.330in. and 0.400in.
0.100in. first hole and 0.120in. first hole
0.065in. first hole and 0.072in. first hole
0.367in. and 0.376in.
32 nut thread
32 stud thread
26.0 rockwell c and 32.0 rockwell c
0.190in. nut thread ⁓13/64"
0.190in. stud thread ⁓13/64"
0.490in. and 0.510in.
0.248in. and 0.250in.
0.1885in. and 0.1890in.
internal threaded hole on shank end 0.1735 in. dia
steel comp 416se
ams 5610 assn std single material response
shouldered
unjf nut thread
unjf stud thread
Unjf stud thread
Unjf nut thread
Shouldered
Steel comp 416se
32 stud thread
32 nut thread
0.380 inches minimum nut thread and 0.420 inches maximum nut thread
0.330 inches minimum stud thread and 0.400 inches maximum stud thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
unjf stud thread thread series shouldered internal threaded hole on shank end 0.1735 in. dia 32 stud thread thread quantity per inch 1.990" overall length 0.380" nut thread thread length right-hand stud thread 3a stud thread thread class
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. all or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). it may be thread relieved. see also stud, locked in.