Serving our customers with quality and safety first.
3a nut thread a
3a nut thread b
RIGHT-Hand nut thread a
RIGHT-Hand nut thread b
1.250in. nut thread b ⁓1-1/4"
2.360in. nut thread a ⁓2-3/8"
1.124in. and 1.125in.
5.910in.
10.360in. ⁓10-3/8"
nssn class submarine lockout trunk lower hatch
8 nut thread a
8 nut thread b
1.00in. nut thread a ⁓1/64"
1.00in. nut thread b ⁓1/64"
32.0 microinches shank
stud, special, rod
item is coded with a DSS-Fc for deep submergence systems item also has two 45 degree grooves on shaft, see drawing for further details
copper alloy and nickel alloy and aluminum alloy
QQ-N-285 fed spec single material response
shouldered
unc nut thread a
unc nut thread b
Unc nut thread b
Unc nut thread a
Shouldered
Copper alloy and nickel alloy and aluminum alloy
8 nut thread b
8 nut thread a
2.360 inches nut thread a
1.250 inches nut thread b
Right-hand nut thread b
Right-hand nut thread a
3a nut thread b
3a nut thread a
FSC 5307 ⁓ Studs
Used on nssn class submarine lockout trunk lower hatch. unc nut thread b thread series shouldered item is coded with a dss-fc for deep submergence systems item also has two 45 degree grooves on shaft, see drawing for further details stud, special, rod 8 nut thread b thread quantity per inch 10.360" overall length 2.360" nut thread a thread length right-hand nut thread b 3a nut thread b thread class
1. | H547-1720-27 | Cage 96169 |
2. | 167-7107409 | Cage 53711 |
Nothing similar to this part number was found in our inventory
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. all or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). it may be thread relieved. see also stud, locked in.