Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. KB1224A specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a nut thread
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.250in. stud thread ⁓1/4"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.188in. nut thread ⁓13/64"
The length of the enlarged portion/s/ located on the shank of the item.
0.125in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.563in. ⁓37/64"
The distance across the flats.
0.250in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 stud thread
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40 nut thread
A designation that is used for the purpose of general identification of the thread.
0.112in. nut thread ⁓1/8"
A designation that is used for the purpose of general identification of the thread.
0.138in. stud thread ⁓9/64"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
chromate
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-C-5541 mil spec single treatment response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
shouldered and stepped
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc stud thread
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by material which must conform to ships parts control center special quality control provisions
Answers.
1EA
Unc stud thread
Unc nut thread
Shouldered and stepped
Aluminum
40 nut thread
32 stud thread
0.188 inches nut thread
0.250 inches stud thread
Right-hand stud thread
Right-hand nut thread
3a stud thread
3a nut thread
FSC 5307 ⁓ Studs
NSN 5307-01-327-5188 STUD,SHOULDERED AND STEPPED
unc stud thread thread series shouldered chromate surface treated 40 nut thread thread quantity per inch 0.563" overall length 0.188" nut thread thread length right-hand stud thread 3a stud thread thread class
- NIIN
- 013275188
- NIIN Date
- 10/16/90
- Schedule B
- Name Code
- 15944
- FIIG
- A051A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $12.00 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | LL-HX6-8673 | Cage 14153 |
| 2. | 4727.A-6 | Cage 55566 |
Major End Users Countries and entities
- - Department of The Navy
Availability for KB1224A A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Nails, iron or steel (less than 35 feet)
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
KB1224A / Stud,shouldered and steppedWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. all or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. it may be thread relieved. excludes items with tapered threads. see also stud, locked in.
