Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 33-062725-01 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.625in. stud thread ⁓5/8"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.438in. nut thread ⁓29/64"
The length of the enlarged portion/s/ located on the shank of the item.
0.095in. and 0.105in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.219in. ⁓1-7/32"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 stud thread
A designation that is used for the purpose of general identification of the thread.
4.0 mm nut thread
A designation that is used for the purpose of general identification of the thread.
0.190in. stud thread ⁓13/64"
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
0.70 nut thread
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.
6g external nut thread
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
shoulder shape 0.370 in. min wide 0.380 in. wide max 0.370 in. min length 0.380 in. max length; stud end dia 0.190 in. dia; 0.06 in. wide groove below shoulder 0.03 r
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 303
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
astm A582 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 type iv fed spec single treatment response
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
shouldered and stepped
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
m nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf stud thread
Answers.
Unf stud thread
M nut thread
Shouldered and stepped
Steel comp 303
32 stud thread
0.438 inches nut thread
0.625 inches stud thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
FSC 5307 ⁓ Studs
NSN 5307-01-205-5149 STUD,SHOULDERED AND STEPPED
unf stud thread thread series shouldered passivate surface treated shoulder shape 0.370 in. min wide 0.380 in. wide max 0.370 in. min length 0.380 in. max length; stud end dia 0.190 in. dia; 0.06 in. wide groove below shoulder 0.03 r 32 stud thread thread quantity per inch 1.219" overall length 0.438" nut thread thread length right-hand stud thread 2a stud thread thread class
- NIIN
- 012055149
- NIIN Date
- 04/09/85
- Schedule B
- Name Code
- 15944
- FIIG
- A051A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Germany
- - Italy
Availability for 33-062725-01 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
33-062725-01 / Stud,shouldered and steppedWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. all or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. it may be thread relieved. excludes items with tapered threads. see also stud, locked in.
