Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1035A882 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a nut thread
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a stud thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand nut thread
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand stud thread
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.219in. nut thread ⁓1-7/32"
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
1.298in. stud thread ⁓1-5/16"
The length of the enlarged portion/s/ located on the shank of the item.
0.500in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.125in. ⁓3-1/8"
The distance across the flats.
0.500in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
13 stud thread
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18 nut thread
A designation that is used for the purpose of general identification of the thread.
0.312in. nut thread ⁓5/16"
A designation that is used for the purpose of general identification of the thread.
0.500in. stud thread ⁓1/2"
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 482
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
QQ-B-637, comp 21/2 hard fed spec single material response
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc nut thread
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc stud thread
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by packaging which must conform to ships parts control center special quality control provisions
Answers.
1EA
Unc stud thread
Unc nut thread
Copper alloy 482
18 nut thread
13 stud thread
1.298 inches stud thread
1.219 inches nut thread
Right-hand stud thread
Right-hand nut thread
2a stud thread
2a nut thread
FSC 5307 ⁓ Studs
NSN 5307-01-061-8086 STUD,SHOULDERED AND STEPPED
unc stud thread thread series 18 nut thread thread quantity per inch 3.125" overall length 1.298" stud thread thread length right-hand stud thread 2a stud thread thread class
- NIIN
- 010618086
- NIIN Date
- 06/30/78
- Schedule B
- Name Code
- 15944
- FIIG
- A051A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $39.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for 1035A882 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093460 BOLTS/NUTS NOI BBC/ZINC
- UFC (universal freight code)
- 48930
Similar by Design Other studs with similar characteristics
Nothing similar to this part number was found in our inventory
1035A882 / Stud,shouldered and steppedWhat is the formal definition of this item?
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends, on which the nominal diameter of one threaded section is greater than the other. all or part of the unthreaded section is greater than the maximum major diameter of the largest threaded section. it may be thread relieved. excludes items with tapered threads. see also stud, locked in.
