Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. ST3M496-4-8 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.371in. and 0.438in. ⁓29/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.881in. and 0.928in. ⁓15/16"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat countersunk
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.497in. and 0.507in.
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.2646in. first shoulder and 0.2651in. first shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.401in. first shoulder
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
HIGH-Torque
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
The included angle of the countersink.
99.0 degrees and 101.0 degrees
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
socket drive recess in thread end 0.095 in. min. and 0.097 in max. width across flats
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
23-112, fscm 76301 mfr ref single material response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
Unjf
Steel corrosion resisting
28
Flat countersunk
0.371 inches minimum and 0.438 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-073-0954 SCREW,SHOULDER
unjf thread series socket drive recess in thread end 0.095 in. min. 28 thread quantity per inch flat countersunk head style 0.371" thread length right-hand 3a thread class
- NIIN
- 010730954
- NIIN Date
- 03/09/79
- Schedule B
- 7318152000
- Name Code
- 22846
- FIIG
- A003B0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $16.70 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | HT4008-4-8 | Cage 73197 |
| 2. | HT4008-4-8 | Cage 06950 |
| 3. | HT4008-4-8 | Cage 17446 |
| 4. | WC4008-4-8 | Cage 60516 |
| 5. | HT4008-4-8 | Cage L4528 |
| 6. | HT4008-4-8 | Cage 80539 |
| 7. | HT4008-4-8 | Cage 97928 |
| 8. | HT4008-4-8 | Cage 92215 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Spain
- - Australia
- - Canada
- - Republic of Korea
Availability for ST3M496-4-8 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
ST3M496-4-8 / Screw,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.
