Serving our customers with quality and safety first.
3a
RIGHT-Hand
0.338in. and 0.388in. ⁓25/64"
1.876in. and 1.906in. ⁓1-29/32"
flat countersunk
0.752in. and 0.762in.
0.3896in. and 0.3901in. first shoulder
1.365in. and 1.385in. first shoulder
HIGH-Torque
0.375in. ⁓3/8"
24
125000 pounds per square inch
99.0 degrees and 101.0 degrees
round first shoulder
socket drive recess in thread end 0.170 in. min, 0.200 in max length; 0.1.582 in., 0.1617 in. max width across the flats
steel comp XM-13
ams 5629 assn std single material response
passivate
QQ-P-35 fed spec single treatment response
unjf
1EA
Unjf
Steel comp xm-13
24
Flat countersunk
0.338 inches minimum and 0.388 inches maximum
Right-hand
3a
Schedule B number: 7318152000
nmfc 093486
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unjf thread series passivate surface treated socket drive recess in thread end 0.170 in. min, 0.200 in max length; 0.1.582 in., 0.1617 in. max width across the flats 24 thread quantity per inch flat countersunk head style 0.338" thread length right-hand 3a thread class
1. | HT4008-6-22 | Cage 92215 |
2. | ST3M496-6-22 | Cage 76301 |
3. | 11913-6-22 | Cage 59563 |
4. | HT4008-6-22 | Cage 73197 |
5. | HT4008-6-22 | Cage 80539 |
6. | HT4008-6-22 | Cage 17446 |
7. | HT4008-6-22 | Cage 06950 |
8. | ST3M496-6-22 | Cage 58998 |
9. | WC4008-6-22 | Cage 60516 |
10. | HT4008-6-22 | Cage K5673 |
11. | HT4008-6-22 | Cage L4528 |
12. | HT4008-6-22 | Cage 97928 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.