Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 350096-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.090in. ⁓3/32"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.369in. and 0.373in. ⁓3/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
flat chamfer
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.
0.160in.
A measurement from the bottom to the top of the head,in distinction from depth.
0.060in. ⁓1/16"
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.279in. first shoulder and 0.283in. first shoulder
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
slot
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round first shoulder
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
pilot hole in head, 0.062 in. dia 0.120 in. depth
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
Answers.
1EA
Flat chamfer
0.090 inches maximum
2a
FSC 5305 ⁓ Screws
NSN 5305-00-168-2055 SCREW,SHOULDER
passivate surface treated pilot hole in head, 0.062 in. dia 0.120 in. depth flat chamfer head style 0.090" thread length 2a thread class
- NIIN
- 001682055
- NIIN Date
- 02/11/73
- Schedule B
- Name Code
- 22846
- FIIG
- A003B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $325.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Portugal
Availability for 350096-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 093486 BOLTS,NUTS OR SCREWS, NOI (SUB 3)
- UFC (universal freight code)
- 48950
Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
350096-1 / Screw,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.
