Serving our customers with quality and safety first.
2a
RIGHT-Hand
0.189in. ⁓13/64"
1.281in. ⁓1-9/32"
undercut hexagon
0.047in. ⁓3/64"
0.375in.
0.2496in. first shoulder and 0.2499in. first shoulder
1.030in. first shoulder and 1.035in. first shoulder
0.133in. ⁓9/64"
w/o internal drive
0.164in. (UTS #8)
1
threaded
32
35.0 rockwell c and 40.0 rockwell c
1
hexagon longitudinal hole
0.138in.
round first shoulder
drill hole in head 0.562 in. min, 0.624 in. max deep
steel comp 8640
OD8853 ty d, gr 2, cl a mfr ref single material response or astm A304 assn std single material response or astm A322 assn std single material response or astm A331 assn std single material response
phosphate
MIL-P-16232 ty m, cl 1 mil spec single treatment response
unc
Unc
Steel comp 8640
32
0.133 inches
Undercut hexagon
0.189 inches
Right-hand
2a
Schedule B number: 7318152000
nmfc 096640
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
unc thread series phosphate surface treated drill hole in head 0.562 in. min, 0.624 in. max deep 32 thread quantity per inch 0.133" hole diameter undercut hexagon head style 0.189" thread length right-hand 2a thread class
1. | 2129496 | Cage D9182 |
Nothing similar to this part number was found in our inventory
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.