Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1C9894-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.444in. ⁓29/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
6.188in. ⁓6-13/64"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.115in. and 0.135in. ⁓9/64"
0.375in.
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.185in. third shoulder and 0.190in. third shoulder
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.200in. second shoulder and 0.205in. second shoulder
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.245in. first shoulder and 0.255in. first shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.021in. third shoulder and 0.026in. third shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
4.195in. second shoulder and 4.200in. second shoulder
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
1.115in. first shoulder and 1.120in. first shoulder
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.
w/o internal drive
The national stock number or the identification information of the end equipment for which the item is a part.
pacer dawn
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.190in. (UTS #10)
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round all shoulders
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
grove 0.850in. from head. 0.095in. long and 0.190 dia; and a 60degree cone point, 0.164in. long from the threaded end
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AMS5643 assn std single material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
MIL-F-14072-E300 mil spec all treatment responses
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
idf blanker mounting
Answers.
Unf
Steel comp 630
32
Hexagon
0.444 inches
Right-hand
2a
Schedule B number: 7318152000
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5305 ⁓ Screws
NSN 5305-01-381-6320 SCREW,SHOULDER
Used on pacer dawn. unf thread series passivate surface treated grove 0.850" from head. 0.095" long 32 thread quantity per inch hexagon head style 0.444" thread length right-hand 2a thread class
- NIIN
- 013816320
- NIIN Date
- 10/20/93
- Schedule B
- 7318152000
- Name Code
- 22846
- FIIG
- A003B0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Taiwan, Province of China
Availability for 1C9894-1 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other screws with similar characteristics
Nothing similar to this part number was found in our inventory
1C9894-1 / Screw,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.
