04-21577

0421577 Shoulder Screw

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. 04-21577 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

6g

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Thread Length
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.

24.5 mm and 27.5 mm

Fastener Length
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.

64.2 mm and 65.8 mm

Head Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.

fillister

Head Diameter
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.

14.8 mm and 15.3 mm

Head Height
A measurement from the bottom to the top of the head,in distinction from depth.

1.4 mm and 1.9 mm

Shoulder Diameter
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.

10.7 mm first shoulder and 10.9 mm first shoulder

Shoulder Length
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.

5.2 mm first shoulder and 6.8 mm first shoulder

End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.

6115-01-561-7718 generator set, diesel engine

Nominal Thread Diameter
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.

10.0 mm

Thread Pitch In Millimeters
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.

1.5

Shoulder Shape
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.

ribbed first shoulder

Part Name Assigned By Controlling Agency
The name assigned to the item by the government agency or commercial organization controlling the design of the item.

stud, knurled

Color
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.

black

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel property class 8.8

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

sae J1199, class 8.8 assn std single material response

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

oxide

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-C-13924D, class 1 mil spec single treatment response

Thread Series Designator
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.

m

Answers.

What class is the thread series?

M

What material is the shoulder screw made of ?

Steel property class 8.8

What is the head style?

Fillister

What is the thread length?

24.5 millimeters minimum and 27.5 millimeters maximum

What is the thread direction?

Right-hand

What is the thread class?

6g

What is the NSN for 04-21577?

5305-01-599-3175

What's the federal classification of 04-21577?

FSC 5305 ⁓ Screws

NSN 5305-01-599-3175 SCREW,SHOULDER

Used on 6115-01-561-7718 generator set, diesel engine. m thread series oxide surface treated stud, knurled fillister head style 24.5mm thread length right-hand 6g thread class

NIIN
015993175
NIIN Date
09/22/11
Schedule B
 
Name Code
22846
FIIG
A003B0
QUP
 
Historical Price
$9.58 EA
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
No precious metals
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Major End Users Countries and entities

  • - Department of The Army 
  • - U.s. Marine Corps 

Availability for 04-21577 A member of our team will provide you with a price and availability quote

Request a Quote »

Shipping Information

Special Handling
Other or no special handling required (sh) 
LTL (less than a truck load rating)
70.0 
LCL (less than a car load rating)
Unknown
Special Cargo
No special type of cargo code applicable 
Air Freight (Minimum cargo door size required)
Shipment is not a consolidation and does not exceed 84 inches in any dimension. 
Customs Requirement Classification
Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater 
Commodity (for shipments via water)
Metal hardware 
NMFC (national motor freight code)
096640 SCREWS, IRON OR STEEL 
UFC (universal freight code)
50600 

Similar by Design Other screws with similar characteristics

Nothing similar to this part number was found in our inventory

04-21577 / Screw,shoulderWhat is the formal definition of this item?

An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in.) (1.5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is designed to be driven with either a wrench or an inserted driver or both in sizes below no. 10 (0.190 in.) (5 mm) nominal diameter. no. 10 (0.190 in.) (5 mm) and larger sizes must be designed for any type of inserted driver, but may also provide for external wrenching of the head. a locking feature may be incorporated in the design of the head or threads. for items which are both shouldered and have an externally relieved body, use screw, externally relieved body. for items with a no. 10 (0.190 in.) (5 mm) or larger thread diameter without an inserted driver head, use bolt, shoulder. excludes bolt, internal wrenching and screw, cap, socket head.