Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. VS3589-4-14 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.453in. ⁓29/64"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
1.328in. and 1.368in. ⁓1-3/8"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
hexagon
A measurement from the bottom to the top of the head,in distinction from depth.
0.172in. and 0.204in. ⁓7/32"
0.490in. and 0.502in.
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.869in. and 0.921in.
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.760in. and 0.780in.
The national stock number or the identification information of the end equipment for which the item is a part.
C-17A
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.250in. ⁓1/4"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
28
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
95000 pounds per square inch
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
grip length 0.885
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron alloy 660
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 5731 assn std single material response or ams 5737 assn std 1st material response
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
passivate or cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-35 fed spec 1st treatment response or QQ-P-416, TY2, CL2 fed spec 2nd treatment response
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Iron alloy 660
28
Hexagon
0.453 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093490
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-481-2824 BOLT,SHOULDER
Used on C-17A. unjf thread series passivate or cadmium surface treated grip length 0.885 28 thread quantity per inch hexagon head style 0.453" thread length right-hand 3a thread class
- NIIN
- 014812824
- NIIN Date
- 12/27/00
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $12,182.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AIC1690U-4-14 | Cage 06725 |
| 2. | PBF1602U-4-14 | Cage 27624 |
| 3. | FIT7807U-4-14 | Cage 58998 |
| 4. | 3D0124U4-14 | Cage 88277 |
| 5. | AIC1690U-4-14 | Cage 06725 |
| 6. | PBF1602U-4-14 | Cage 27624 |
| 7. | FIT7807U-4-14 | Cage 58998 |
| 8. | 3D0124U4-14 | Cage 88277 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for VS3589-4-14 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 50.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093490 BOLT/NUT/SCREW/CLIPS/FASTENER/ETC
- UFC (universal freight code)
- 50270
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
VS3589-4-14 / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
