Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. NAS1160-5-5 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.498in. ⁓1/2"
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.
0.800in. and 0.840in. ⁓27/32"
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.
err default
A measurement from the bottom to the top of the head,in distinction from depth.
0.156in. and 0.171in. ⁓11/64"
0.492 mils and 0.502 centimeters
The length of a straight line which passes through the center of the shoulder and terminates at the circumference.
0.015in. and 0.025in.
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.
0.011in. and 0.021in.
The national stock number or the identification information of the end equipment for which the item is a part.
stryker
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.
0.313in. ⁓21/64"
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.
7490 pounds per square inch
The physical configuration of the unthreaded portion of a body adjacent to the head which is larger than the diameter of the shank.
round
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
bolt, shoulder, hex head, close tolerance
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unjf
Answers.
1EA
Unjf
Steel corrosion resisting
24
Err default
0.498 inches
Right-hand
3a
Schedule B number: 7318152000
nmfc 093470
Bolts and bolts and their nuts or washers exported in the same shipment
FSC 5306 ⁓ Bolts
NSN 5306-01-590-7180 BOLT,SHOULDER
Used on stryker. unjf thread series bolt, shoulder, hex head, close tolerance 24 thread quantity per inch err default err default 0.498" thread length right-hand 3a thread class
- NIIN
- 015907180
- NIIN Date
- 12/17/10
- Schedule B
- 7318152000
- Name Code
- 04905
- FIIG
- A003B0
- QUP
- 1
- Historical Price
- $123.50 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for NAS1160-5-5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- 70.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater
- Commodity (for shipments via water)
- Bolts or nuts (iron or steel),(less than 35 feet)
- NMFC (national motor freight code)
- 093470 BOLTS/NUTS I/S
- UFC (universal freight code)
- 48940
Similar by Design Other bolts with similar characteristics
Nothing similar to this part number was found in our inventory
NAS1160-5-5 / Bolt,shoulderWhat is the formal definition of this item?
An externally threaded fastener whose threaded portion is of one nominal diameter, no. 10 (0.190 in.) (5 mm) or larger. it has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. the head is not designed to be held or driven with an inserted drivers. a locking feature may be incorporated in the design of the head or threads. for items with a thread diameter smaller than no. 10 (0.190 in.) (5 mm) and those items with an inserted drive head, use screw, shoulder. for items which are no. 10 (0.190 in.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use bolt, externally relieved body. excludes thumbscrew.
